View source

== Required hardware ==
* A computer running Linux
* A [http://www.xilinx.com/ml401 Xilinx ML401] development board
* A [http://www.xilinx.com/products/devkits/HW-USB-G.htm DLC9 JTAG cable], also known as "Platform Cable USB". DLC10 cables ("Platform Cable USB II") have also been reported to work.
* A Compact Flash card.
* A Compact Flash reader.
* A VGA monitor.
* A microphone or another audio source.

Optional (for development and troubleshooting only):
* A crossover RS232 cable to connect between your computer and the ML401 serial port.
* If your computer does not have a RS232 port (DB9 plug), a USB/Serial adapter is recommended.